Friday, February 19, 2010

Discharge Befor Menstation I Use Ni-MH Battery For My Dig. Camera. Should I Fully Discharge The Battery Befor Ev Recharge Or Occassionaly?

I use Ni-MH battery for my dig. Camera. Should I fully discharge the battery befor ev recharge or occassionaly? - discharge befor menstation

NiMH batteries should generally not be fully discharged before recharging. However, there are certain things you can do to make batteries that work for you in the potential:

1. Reach right out of the box and before the NiMH batteries to full potential, it can discharge 2-3 charge cycles. If the sender can before charging (some of them take over this function), you can download / upload the newly acquired battery 2-3 times before the first use, so it's first project, which would be fully installed in a camera .

2. NiMH batteries self-drain when not in use. When a fully charged battery sitting on a shelf for a couple of weeks, you can lose 10-20% of his office during this period. So it is better to keep in charghe at any time, unless the sender can correctly "trickle charge batteries. In order to ensure sufficient capacity to complete it is fully charged.

3. NiMH batteries rarely give in advance that the power supply was interrupted almost exhausted. Although regular alkaline reduce gradually the tension, because they are used (the battery meter levels show a relatively sharp) - Start thosw NiMH with a low voltage, but remains constant up to death, they tend to the sudden or short term. Always have a number of alternatives available, and / or how many shots you take a NiMH rechargeable batteries in general, and set accordingly.

4. He's never been sick from time to time "by fully charging and discharging, but not really necessary. You can do it all 30-50Expenses or if you wish.

We hope this information will be useful for you to make full use of NiMH batteries.

2 comments:

Nathan said...

With the new battery technology, it should not, you need the battery is fully charged every time you need to recharge again.

AWriterW... said...

This is not really necessary, with Ni-MHS. They do not suffer the dreaded memory effect. It should also be calibrated occasionally, such as lithium ions.

Post a Comment